0人評分過此書
- 編者語 FROM THE EDITOR
- 鳴謝 ACKNOWLEDGEMENTS
- 序 PREFACE
- 作者自序 PREFACE BY AUTHOR
- 作者簡介 ABOUT THE AUTHOR
- 英語目錄 TABLE OF CONTENTS-ENGLISH
- 1．關於軸對稱定常溫度場中旋轉薄殼的熱應力問題（1962年5月在全國第一屆板殼理論學術報告會上宣讀） THERMAL STRESSES ACTING ON ROTATING SHELLSIN AXIS-SYMMETRICAL TEMPERATURE FIELDS
- 2．關於扁殼的熱應力問題（原載1962年9月《力學學報》） ON THE THERMAL STRESS PROBLEMS OF SHALLOW SHELLS
- 3．內外表面溫度各為均佈時圓底扁球殼的熱應力（原載1963年9月《力學學報》） THERMAL STRESSES OF SHALLOW SPHERICAL SHELLS WITH CIRCULAR BASE UNDER THE ACTION OF CONSTANT TEMPERATURE DISTRIBUTION ON OUTER AND INNER SURFACE
- 4．建議一組關於極限分析的定理（原載1975年第4期《科學通報》） SUGGESTING A SYSTEM OF THEOREMS ON LIMIT ANALYSIS
- 5．集中力作用下閉口截面圓柱殼的一個解（原載1979年1月《力學學報》） A SOLUTION OF CYLINDRICAL SHELL UNDER CONCENTRATED LOADS
- 6．四邊簡支矩形底夾層扁球殼的簡化計算（原載1980年3月《兵工學報》） A SIMPLIFIED METHOD FOR CALCULATING SIMPLY-SUPPORTED RECTANGULAR-BOTTOMED SHALLOW SPHERICAL SANDWICH SHELLS
- 7．均佈載荷作用下的彈性厚板問題（原載1980年5月《力學與實踐》） ON THE PROBLEMS OF ELASTIC THICK PLATES UNDER THE ACTION OF UNIFORMLOADS
- 8．平面應變條件下裂紋尖端附近的彈塑性近似分析（原載1980年5月《應用數學和力學》） AN ASYMPTOTIC ELASTIC PLASTIC ANALYSIS IN PLANE STRAIN DEFORMATION NEAR A CRACK TIP
- 9．具有不等厚表板的夾層板問題（原載1981年2月《固體力學學報》） ON THE PROBLEMS OF SANDWICH PLATES WITH NON-EQUAL THICKNESS OF SURFACE LAYERS
- 10．關於極限分析的變分原理中的某些問題（原載1983年5月《力學學報》）SOME PROBLEMS ON THE VARIATIONAL PRINCIPLES OF LIMIT ANALYSIS
- 11．ON THE PROBLEMS OF SANDWICH SHELLS HAVING THE FORM OF A SURFACE OF REVOLUTION AND FACE LAYERS OF NON-EQUAL THICKNESSES（與李樹明合作，原載1983年6月 Applied Mathematics and Mechanics） ON THE PROBLEMS OF SANDWICH SHELLS HAVING THE FORM OF A SURFACE OF REVOLUTION AND FACE LAYERS OF NON-EQUAL THICKNESSES (IN COLLABORATION WITH LI SHUMING)
- 12．屈服條件由應力張量的二次齊次函數與一次齊次函數之和來表達的極限分析定理（與趙家誼合作，原載1983年7月《應用數學和力學》） THEOREMS ON THE LIMIT ANALYSIS DEALING WITH THE YIELD CONDITION EXPRESSED BY THE SUM OF THE HOMOGENEOUS LINEAR FORM OF STRESS TENSOR AND THE HOMOGENEOUS QUADRATIC FORM OF STRESS TENSOR (IN COLLABORATION WITH ZHAO JIAYI)
- 13.FOUR THEOREMS ON THE LIMIT ANALYSIS IN SOLID MECHANICS（原載HYBRID AND MIXED FINITE ELEMENT METHODS，1983年） FOUR THEOREMS ON THE LIMIT ANALYSIS IN SOLID MECHANICS
- 14．雙向受不等值均佈載荷的簡支矩形板穩定問題的精確解（與趙東明合作，原載1985年2月《兵工學報》） AN EXACT SOLUTION FOR THE STABILITY PROBLEMS OF RECTANGULAR PLATES SIMPLY SUPPORTED UNDER THE ACTION OF UNEQUAL UNIFORM LOADING IN TWO MUTUALLY PERPENDICULAR DIRECTIONS (IN COLLABORATION WITH ZHAO DONGMING)
- 15．建立廣義變分原理的一種方法（原載1985年6月《應用數學和力學》） A METHOD FOR ESTABLISHING GENERALIZED VARIATIONAL PRINCIPLE
- 16．AN ELASTIC-PLASTIC ANALYTICAL ANALYSIS NEAR A CRACK TIP（原載Progress In Applied Mechanics，1987年） AN ELASTIC-PLASTIC ANALYTICAL ANALYSIS NEAR A CRACK TIP
- 17．關於“關於極限分析新上、下限定理中權因子的討論”一文的討論（原載1987年6月《固體力學學報》） ON THE “DISCUSSION ON THE WEIGHTED FACTORS OF NEAR BOUND THEOREMS OF LIMIT ANALYSIS”
- 18．有限變形的極限分析定理（原載1988年3月《應用數學和力學》） THEOREMS ON THE LIMIT ANALYSIS OF FINITE DEFORMATION
- 19．長杆彈量垂撞擊半無限厚靶板的計算（與王儀德合作，原載1988年5月《兵工學報》 A CALCULATION ON THE NORMAL IMPACT OF A LONG-ROD PROJECTILE ACTING ON A SEMI-INFINITE THICK TARGET (IN COLLABORATION WITH WANG YIDE)
- 20．具有不等厚表層的硬夾心雙曲夾層扁殼問題（與周際平合作，原載1988年第4期《北京工業學院學報》） ON THE PROBLEMS OF A SHALLOW DOUBLE CURVED SANDWICH SHELL WITH HARD CORE AND FACE LAYERS OF UNEQUAL THICKNESSES (IN COLLABORATION WITH ZHOU JIPING)
- 21．NORMAL PERFORATION OF A THIN INFINITE PLATE BY A FLAT-HEADED CYLINDRICAL PROJECTILE（原載1988年第2期 International Journal of Impact Engineering） NORMAL PERFORATION OF A THIN INFINITE PLATE BY A FLAT-HEADED CYLINDRICAL PROJECTILE
- 22．NEW BOUND THEOREMS ON THE LIMIT ANALYSIS IN SOLID MECHANICS（與Li Hailong合作，原載Applied Mechanics，1989年）NEW BOUND THEOREMS ON THE LIMIT ANALYSIS IN SOLID MECHANICS (IN COLLABORATION WITH LI HAILONG)
- 23．阻尼介質中簡支圓板在大撓度時的塑性動力響應（與趙亞溥合作，原載1991年10月《應用數學和力學》） THE DYNAMIC PLASTIC BEHAVIOR OF A SIMPLY SUPPORTED CIRCULAR PLATE IN A DAMPING MEDIUM WITH FINITE-DEFLECTIONS (IN COLLABORATION WITH ZHAO YAPU)
- 24．大變形非線性彈性力學的廣義變分原理（原載1991年3月《應用數學和力學》） GENERALIZED VARIATIONAL PRINCIPLES ON NONLINEAR THEORY OF ELASTICITY WITH FINITE DISPLACEMENTS
- 25．ON THE PROBLEMS OF PERFORATION（原載Applied Mathematics and Mechanics，1993，Special Issue） ON THE PROBLEMS OF PERFORATION
- 26．搭接焊縫內應力分佈規律的準確解（原載1995年11月《應用數學和力學》） AN EXACT SOLUTION ON THE STRESS ANALYSIS OF FILLET WELDS
- 27．關於圓柱殼定解方程的通解問題（與薛毅合作，原載1996年12月《應用數學和力學》） ON THE GENERAL SOLUTION OF CYLINDRICAL SHELL EQUATIONS (IN COLLABORATION WITH PETER YI XUE)
- 28．A NEW SLIP LINE THEORY OF NONLINEAR YIELD CRITERION AND ITS APPLICATION（與I.T. Chong合作，原載Proceedings of International Conference on Ground Improvement Technique，1997年） A NEW SLIP LINE THEORY OF NONLINEAR YIELD CRITERION AND ITS APPLICATION (IN COLLABORATION WITH I. T. CHONG
- 29．搭接焊縫內的準確應力分佈（原載1997年6月《應用數學和力學》） THE EXACT SOLUTION OF STRESS DISTRIBUTION IN FILLET WELDS
- 30．關於改進搭接焊件傳統設計方法的探討（原載1997年8月《現代力學與科技進步》） ON THE IMPROVEMENTS OF TRADITIONAL DESIGN METHODS OF FILLET WELDS
- 31．SOME RESULTS ON THE THEORY OF CYLINDRICAL SHELLS（原載Proceedings of IASS International Symposium’ 97 on Shell and Spatial Structures，1997年） SOME RESULTS ON THE THEORY OF CYLINDRICAL SHELLS
- 32．A THEOREM ON LIMIT ANALYSIS AND ITS APPLICATION（原載 12th Engineering Mechanics Conference-An ASCE Specialty Conference，1998年） A THEOREM ON LIMIT ANALYSIS AND ITS APPLICATION
- 33．THE IMPACT BETWEEN VISCOPLASTIC TARGET AND LONG-ROD PROJECTILE WITH HIGH SPEED （原載Proceedings of the Second South African Conference on Applied Mechanics，1998年） THE IMPACT BETWEEN VISCOPLASTIC TARGET AND LONG-ROD PROJECTILE WITH HIGH SPEED
- 34．NORMAL PERFORATION OF A SANDWICH PLATE BY A FLAT-HEADED CYLINDRICAL PROJECTILE （原載Proceedings of the Seventh Annual International Conference on Composites Engineering，2000年） NORMAL PERFORATION OF A SANDWICH PLATE BY A FLAT-HEADED CYLINDRICAL PROJECTILE
- 35．A GENERALIZED VARIATIONAL PRINCIPLE ON THERMAL STRESS OF SHALLOW SHELLS（原載Proceedings of International Conference on Applied Mechanics，2000年） A GENERALIZED VARIATIONAL PRINCIPLE ON THERMAL STRESS OF SHALLOW SHELLS
- 36．A STUDY ON THE CONTROL OF A FINGERTIP TRAJECTORY FOR A MINE-CLEARING MANIPULATOR（原載Proceedings of CARS＆FOF，2001年） A STUDY ON THE CONTROL OF A FINGERTIP TRAJECTORY FOR A MINE-CLEARING MANIPULATOR
- 37．關於河流沙洲的成形問題（原載《第15屆全國水動力學會議文集》，2001年） ON THE PROBLEM OF SHOAL FORMING ON RIVER
- 38．ON THE SOLUTION OF DAVIDENKOV AND SPIRIDONOVA [原載Proceedings of the Fourth International Conference on Nonlinear Mechanics（ICNM-IV），2002年] ON THE SOLUTION OF DAVIDENKOV AND SPIRIDONOVA
- 39．CONCEPTS OF MECHANICAL PARAMETERS TRANSFER IN SOLID MEDIUM AND ITS APPLICATION IN ENGINEERINGS（與趙曉兵、趙玉祥、周豐峻合作，原載2004年2月Applied Mathematics and Mechanics） CONCEPTS OF MECHANICAL PARAMETERS TRANSFER IN SOLID MEDIUM AND ITS APPLICATION IN ENGINEERINGS (IN COLLABORATION WITH ZHAO XIAOBING，ZHAO YUXIANG AND ZHOU FENGJUN)
- 40．爆炸荷載作用下地下複合結構動力分析（與趙曉兵、趙玉祥合作，原載2004年 3月《應用數學和力學》） DYNAMIC ANALYSIS OF UNDERGROUND COMPOSITE STRUCTURES UNDER EXPLOSION LOADING (IN COLLABORATION WITH ZHAO XIAOBING AND ZHAO YUXIANG)
- 附錄：作者榮獲的部份證書及獎章 APPENDIX：AWARDS AND CERTIFICATES
評分與評論
請登入後再留言與評分
PDF
PDF
PDF
PDF
PDF
